• Using the T-55 Torx bit provided, remove the friction plate. The threads are left hand – turn the T-55 Torx bit counter clockwise while holding the friction plate from rotating. It will help to apply air pressure to the clutch while removing the friction plate.
• Once the friction plate is removed, hand-tighten the aluminum cage on the left hand threaded bolt. If you applied air pressure in step one remove it now.
• Remove the lining screws with the T-27 Torx bit provided. Remove the lining.
  

1. Clean all reusable pieces with a clean towel. Do not put the spring housing in a solvent bath.
2. Install the new friction material using the 8 screws provided and the T-27 Torx bit. Torque to 80 Inch Lbs.
3. Now remove the aluminum cage nut.
4. Thread on the friction plate over the left hand threads of the bolt. Use the T-55 Torx bit to tighten. Torque to 100 Ft. lbs.
   
   

Exploded View and Part Description