Instructions to install Journal Spacers

Step 1
  Determine the style of hub you are replacing


Standard Hub
If you have this style hub
reuse your old journal spacer
and discard these instructions
and parts
Non Standard Hub – 1 bearing System
If you have this style hub you will be upgrading to a new two bearing hub
but will need to use the journal spacer
and possibly the red spacer included
with these instructions.



Standard Journal Spacer
Reuse your old journal spacer
Non Standard Journal Spacers
You will need to discard after you take a measurement

Step 2

Now that you have determined that you have the Non Standard hub – you will be upgrading to a two bearing hub system and need use the journal spacer provided. To determine if you need the red spacer on top of the journal spacer, compare your spacer to the dimensions below.

Standard Journal Spacers
If your Non Standard journal spacer fits between the lines (1.285”) then use the standard journal spacer provided. If it doesn’t fit go to step 3.
Step 3

Standard Journal Spacer

If your Non Standard journal spacer did not fit between the first set of lines above (1.285”) but fits between the 1.350” lines then use the standard journal spacer and place the red spacer over the top of it. Your new hub will slide over the journal bracket and on top of the red spacer